[. . . ] The symbols that are lit are selected, but not currently shown on the display (6). • Each press / activation of a sensor key is acknowledged by a beep. € If one of the value settings sensor keys (B) or (C) is touched and kept pressed, the rate at which the value being set is changing will increase. € When the appliance is connected to the power supply or after a power failure, the word “META” or “GLAS” is first displayed for a short while; then, the display flashes for some time. [. . . ] If you wish to resume cooking, press the (A) sensor key and set a new duration if necessary. Setting the cooking end time This mode allows you to set the time at which the oven should stop operating. Maximum setting allowed is 10 hours relative to the current time of day. € Turn on the oven (use the corresponding oven knobs to set the operation mode and temperature). The oven starts to operate immediately and stops operation at the set time. An intermittent beep will sound, which can be stopped by pressing any key; if no key is pressed, the beep stops after one minute. If you wish to resume cooking, press the (A) sensor key and set a new duration if necessary. Setting the oven delayed start With this operation mode, two settings have to be made: cooking time (duration of oven operation) and cooking end time (tie at which the operation should stop). Cooking end time can be delayed by a maximum of 24 hours relative to the current time of day. € First, set the cooking time: Press the (A) sensor key to select the symbol (1). € Then, set the cooking end time: Use the (A) sensor key and select the symbol (2). (A sum of the current time of day and the oven operation time is automatically shown on the display). € The timer will wait for the start of the cooking – both symbols (1 and 2) are lit. € Turn on the oven (use the corresponding oven knobs to set the operation mode and temperature). At the corresponding time, the oven starts operating automatically (the symbol (2) goes off upon the start of operation), and switches off when the set cooking time has elapsed. An intermittent beep will sound, which can be stopped by pressing any key; if no key is pressed, the beep stops after one minute. If you wish to resume cooking, press the (A) sensor key and set a new duration if necessary. Setting the alarm timer The clock can also be used independently of the oven operation, as an alarm timer that sounds an alarm after the expiration of a preset time. [. . . ] Display dimmer Between midnight and 6 AM, the display automatically lights with less intensity, if no timer function is set. Deleting the timer settings • All timer settings can be deleted any time by pressing the (B) and (C) sensor keys simultaneously and holding them for three seconds. The set programs are automatically interrupted and the timer switches to display of the current time of day. € Any timer setting can also be deleted in the following way: selecting it using the (A) sensor key, then press the (B) and (C) sensor keys simultaneously. [. . . ]